Factors to keep in mind while assembling a bulk material handling unit

Some measures and considerations have to be put in place when bulk material equipment or systems are being installed. It is not only for safety reasons but also to facilitate ease in the industrial procedure during assembly of a bulk material handling unit. Material handling equipment manufacturers should note that not every equipment is supposed to be used with every type of material, as the consistency of the material will impact the quality of the finished product.

In the course of equipment selection, some factors that should be considered are as follows:

• Bulk density
• Average particle size
• Particle properties
• Environmental effects
• Material base

Material handling equipment manufacturers do have an essential task before they begin with any process. They are advised to conduct thorough material tests so that the critical processing characteristics can be fully comprehended. For instance, some particle densities change at different phases of the material handling process. Therefore, the assumption that each piece of equipment will work well at the same density level should be discarded. 

Pneumatic transporters are the stronghold of a lot of bulk material handling systems; therefore these measures and considerations are vital for selecting the type of pneumatic carrier to convey particular bulk solids well.

Meanwhile, abrasive materials cannot be conveyed in the same manner as a gluey substance would be sent. Some materials may convey better with dense phase transporting, while the rest are conveyed with dilute phase transporting methods. The considerations mentioned above are crucial for transporting systems, but they affect other handling parts minimally.

Environmental effects can be frustrating. Observing every essential component before the operation starts is by far one of the safest methods. Check the temperature; compare it with the required one and decide if it is good in assembling the bulk material handling unit. Size of particle and cohesion determine how materials can be conjoined and can assess material dispensation too. This suggests that material properties ought to be considered for batching equipment, material feeders, and mixers.

Specialized transporting, processing systems and mixing are required by granulated and dry materials like powdered chemicals, sugar, grain, flour as well as dry cereal. The mentioned bulk material handling and powder bulk handling systems are customized for the incorporated industrial mixing, transporting, measuring and packaging of delicate, gluey or free-flowing solids.

In contrast to parts, equipment and products transported through the process of fabrication, assembly, and packaging belt and chain conveyors, bulk solids and powered solids need a closed screw transporter, pneumatic transporter system which blocks packing, caking, liquefying, agglomeration and contamination. Industrial mixers, pulverisers and vibratory feeders can be included to bulk material handling systems for complete processing.

It is one of the factors that material handling equipment manufacturers should bear in mind while trying to assemble a bulk material handling unit. As a result, the task that is set out to be completed via the assembling of a bulk material handling unit can be achieved on time.